MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.165 inches and 0.169 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.340 inches and 0.360 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.064 inches and 0.070 inches
Top Recess Diameter:
Between 0.210 inches and 0.220 inches
Bottom Recess Angle:
Between 85.0 degrees and 95.0 degrees
Top Recess Angle:
Between 85.0 degrees and 95.0 degrees
Bottom Recess Diameter:
Between 0.210 inches and 0.220 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams4911 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Recessed both sides
