MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.195 inches and 0.205 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.370 inches and 0.380 inches
External Prebent Key Length:
Between 0.050 inches and 0.060 inches
External Tapered Key Width:
0.263 inches
External Prebent Key Width:
Between 0.110 inches and 0.115 inches
Distance From Centerline To Inside Of Prebent Key:
Between 0.221 inches and 0.231 inches
Overall Distance Including Keys:
Between 0.535 inches and 0.561 inches
Split Key Length:
Between 0.100 inches and 0.115 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.022 inches
Angle Between External Keys:
60.0 degrees
External Prebent Key Angle:
15.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches top
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 321
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5510 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Key
