TXT
묘사:
Headed Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Dee
Distance From Centerline To Flat:
Between 0.160 inches and 0.170 inches
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
Between 0.020 inches and 0.040 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.311 inches and 0.312 inches
Under Head Length:
Between 1.020 inches and 1.030 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
W/s: support equipment, c-5 aircraft; engine, aircraft, f100-pw-100 (f-15a/b/c/d); engine, aircraft, f100-pw-220 (f-15c/d/e); aircraft, eagle f-15; aircraft, f-16
Pin Chamfer Angle:
Between 40.0 degrees and 50.0 degrees
Pin Head Diameter:
Between 0.560 inches and 0.580 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches head bearing surface
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.050 inches and 0.060 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5707 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight
