TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Slotted
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.188 inches and 0.189 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.600 inches and 0.606 inches
Undercut Diameter:
Between 0.173 inches and 0.175 inches
Under Head Length:
Between 0.654 inches and 0.674 inches
Undercut Width:
Between 0.027 inches and 0.031 inches
First End Slot Width:
Between 0.013 inches and 0.019 inches
First End Slot Depth:
Between 0.050 inches and 0.055 inches
Pin Head Diameter:
Between 0.236 inches and 0.244 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches all other surfaces
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches outside diameter
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.018 inches and 0.022 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
