TXT
묘사:
Nonmetallic Special Shaped Seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Hollow bulb
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Solid
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.840 inches and 2.860 inches
MRC:
The means used to attach the item.ABSX
Attachment Method:
Round hole
MRC:
The number of attachment features included.ADTL
Attachment Feature Quantity:
3
MRC:
The length of a straight line which passes through the center of an attachment hole,and terminates at the circumference.ADTM
Attachment Hole Diameter:
Between 0.140 inches and 0.160 inches
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the inside circumference.ADVK
Cross Section Inside Diameter:
Between 0.110 inches and 0.130 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.050 inches and 0.070 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.240 inches and 0.260 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
Between 0.970 inches and 0.990 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
The center to center distance between an attachment feature and the adjacent attachment feature along the length.CTQQ
Attachment Feature Center To Center Distance Along Length:
0.930 inches
MRC:
The center to center distance between an attachment feature and the adjacent attachment feature along the width.CTQR
Attachment Feature Center To Center Distance Along Width:
0.930 inches
End Cut Angle:
26.0 degrees and 28.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber butadiene-acrylonitrile class nbr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-7362, type 2 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Strip
