MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
6.800 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
1.500 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
6.3940 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Naviagational lights mast alteration
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
6
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Unthreaded-countersunk all holes
MRC:
The countersunk hole angle,expressed in degrees,and the location.CQNY
Countersunk Hole Angle In Deg And Location:
82.0 all holes
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the inside circumference,and the location.CRZW
Hole Diameter And Location:
0.4060 inches all holes err-100 err-100
MRC:
The length of a straight line which passes through the center of the largest dimension of a countersink,and terminates at the inner circumference,and the location.CSFB
Countersink Major Diameter And Location:
0.8200 any acceptable pounds major
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
2 1/8 inch sawcuts on o.D.
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Nickel-copper alloy, qq-n-281, class a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 400
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281, class a federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain round
