MRC:
A nominal measurement of the center to center distance between teeth or pins,taken along the pitch line.AKGQ
Pitch Distance:
0.500 inches
MRC:
The number of rows that comprise the width of a link or chain assembly.AWFN
Link Row Quantity:
3
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first chain link.AWFQ
First Chain Link Style:
Roller
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second chain link.AWFR
Second Chain Link Style:
Pin
First Chain Link Plate Width:
0.4750 inches
First Chain Link Plate Thickness:
0.0600 inches
First Chain Link Roller Diameter:
0.3120 inches
First Chain Link Width Between Plates:
0.3120 inches
Second Chain Link Plate Width:
0.410 inches
Second Chain Link Plate Thickness:
0.0600 inches
Second Chain Link Pin Diameter:
0.1560 inches
Second Chain Link Width Between Plates:
0.3120 inches
MRC:
An overall measurement taken at right angles to the length of the link plateat the pin end, in distinction from thickness.AWSP
Link Plate Width At Pin End:
0.410 inches
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
9375 pounds per square inch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
