부품 정보
Serd item name=fixture machining fan aft shaft; c/o a tool steel plate with a series of pilot diameters turned into rings for accurately mounting and locating fan rotor shafts; 13 0.250-20 unc-a 0.75 long socket head cap screws and 13 0.25 flat washers
TXT
묘사:
Aircraft Engine Machining Fixture
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F118-ge-100 engine
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
16.500 inches
MRC:
The nominal measurement taken at right angles to the length of an item,in distinction from thickness.CXRQ
Nominalwidth:
16.500 inches
MRC:
The nominal distance measured in a straight line from the bottom to the top of an item.CYAG
Nominalheight:
1.500 inches
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Used during repair of the fan rotor rear shaft when machining of the front and rear pilot diameters and restrains the shaft at the flanged end for the in-process machining to enlarge the pilot diameters, prior to thermal spray build-up, and subsequent final machining to required dimensions
MRC:
The measured weight of an item unencumbered by packaging or packing material.PKWT
Unpackaged Unit Weight:
92.000 pounds
MRC:
Literature and references available for information pertaining to the item.RDAL
Reference Data And Literature:
Contract f33657-95-c-0055, serd 6012
