TXT
묘사:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.865 inches and 0.885 inches
Distance From Centerline To Flat:
Between 0.365 inches and 0.385 inches
Concentric Hole Depth:
Between 0.878 inches and 0.898 inches
Concentric Hole Diameter:
Between 0.125 inches and 0.127 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.590 inches and 2.610 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
Between 0.550 inches and 0.570 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Round with wrench flats
First Diameter From Wrenching Feature:
Between 0.623 inches and 0.624 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
Between 1.870 inches and 1.890 inches
First Radial Fluid Hole Diameter:
Between 0.095 inches and 0.110 inches
Distance From First Radial Hole Center To End Of Bolt:
Between 1.805 inches and 1.825 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
Between 2.430 inches and 2.450 inches
Wrenching Feature Height:
Between 0.150 inches and 0.170 inches
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
18
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.625 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
