TXT
묘사:
Headed Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Round w/wrench flats chamfered
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.374 inches and 0.375 inches
Under Head Length:
Between 0.180 inches and 0.200 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F110-ge-100/129/129b aircraft
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.499 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
58.0 rockwell c and 62.0 rockwell c
Pin Chamfer Angle:
45.0 degrees
Pin Head Diameter:
0.900 inches
MRC:
Indicates the type of device that is attached to the pin.CTDJ
Pin Attachment Type:
Guide pin
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
0.125 in guide hole drilled parallel to axis through head 0.325 in from axis; 45deg champfer on heads top circumference and flats
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.150 inches and 0.170 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp o1
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Oxide
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight