MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Poppet
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4 all ends
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
2.000 inches all ends
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
3.000 inches all ends
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Automatic
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Rectangular with holes all ends
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange all ends
MRC:
The installed position for which the item is designed.BBJX
Mounting Position:
Vertical
MRC:
Designates the size of the valve.CCFG
Valve Size:
1.250 inches
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
5000.0 pounds per square inch single response
MRC:
The predetermined pressure at which the item is calibrated to open.CSDC
Opening Pressure Setting:
38.0 pounds per square inch
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.250 inches all ends
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.469 inches all ends
MRC:
The center to center nominal distance between bolt holes along the length of an item.CWCY
Center To Center Distance Between Bolt Holes Along Length:
2.310 inches all ends
MRC:
The center to center nominal distance between bolt holes along the width of an item.CWDC
Center To Center Distance Between Bolt Holes Along Width:
1.190 inches 2nd end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Raised straight 1st end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Plain 2nd end
MRC:
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH
Raised Face Height:
0.188 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL
Raised Face Diameter:
1.250 inches 1st end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Oil, hydraulic single response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight thru
