부품 정보
Loops to work over 0.655 diameter shaft; ends to be full loops to center line; a portion of last coil to be reduced to agree with loop dia; shot peen to 0.010-0.014 a2 per stp51-501; nha 3c00540; used on ecp 1067k/c-141a/c-141b
TXT
묘사:
Extension Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.012 inches
MRC:
A measurement taken at right angles to the length of an opening,in distinction from thickness.ABPP
Opening Width:
0.540 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Machine half loop both ends
Spring Free Length:
6.708 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
18
MRC:
Indicates the design type of the item.APGF
Design Type:
Closed
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 65.500 pounds and 72.500 pounds
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
145.000 pounds per inch
Spring Free Outside Diameter:
1.500 inches
Hook Radius:
0.335 inches both ends
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
6.730 inches
Coil To Hook Inside Length:
0.670 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae 9254 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
