TXT
묘사:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Shoulder
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
1.000 inches
Distance From Centerline To Flat:
0.430 inches
Concentric Hole Depth:
0.640 inches
Concentric Hole Diameter:
Between 0.093 inches and 0.098 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.518 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.ADDV
Cotter Pin Hole Diameter:
Between 0.105 inches and 0.110 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.660 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Round with wrench flats
MRC:
The distance measured along a line parallel to the longitudinal axis of the bolt end to hole center.BBKK
Distance From Bolt End To Hole Center:
0.190 inches
First Diameter From Wrenching Feature:
0.624 inches
Second Diameter From Wrenching Feature:
Between 0.436 inches and 0.437 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
0.753 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
1.733 inches
First Radial Fluid Hole Diameter:
Between 0.061 inches and 0.066 inches
Distance From First Radial Hole Center To End Of Bolt:
2.115 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
2.393 inches
Wrenching Feature Height:
0.125 inches
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
20
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.438 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5626, cond c4 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
