부품 정보
Panels, information, integrally illuminated
TXT
묘사:
Light Transmitt Indicating Panel
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.240 inches
MRC:
The element,compound,or mixture of which the panel is fabricated,excluding any surface treatment.ANJG
Panel Material:
Plastic, mil-p-5425
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
The panels shall be subjected to the altitude test of method 105 of mil-std-202 for 30 minutes at an altitude of 100, 000 feet
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
All lamps shall be protected by a of 0.030" of plastic between the lamps and the front face of the panel, all embedded light sources and associated circuitry shall be recessed from the rear surface of the panel and covered with a of 0.020" film of non-conductive resin; resin shall not protrude above the rear surface of the panel
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
The panels shall be capable of withstanding five cycles of temperature shock where each cycle consists of a 1hr soak time at -65c, a 3 minute transition between-65c and 85c, and a 1hr soak time at 85c
