MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Two circular grooves
First End Groove Width:
Between 0.0860 inches and 0.0910 inches
First End Groove Diameter:
Between 2.0260 inches and 2.0380 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Plain
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 18.370 inches and 18.390 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
USED-ON-432-0015
First End Distance From End To Groove:
Between 7.073 inches and 7.074 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 2.1655 inches and 2.1660 inches
First End External Thread Length:
2.630 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.9825 inches and 0.9835 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
6
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Amfz and amdl and cspy
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 2.1655 inches and 2.1660 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Type 17-4 ph, astm a564, cond h assn standard single material response
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material is stainless steel bar, 2.25 diameter type 17-4 ph, astm a564, cond. H heat treat to h-1025; hardening process is heat to 1025 f for 4 hours and air dry; rockwell hardness c 35-42; threaded end 1.250-12 unf-3a; oil return groove 0.09 wide x 0.03 deep x 0.25 pitch
