부품 정보
Protrusion on one side of head 0.080 in. Min and 0.100 in. Maximum height, 0.050 in. Min and 0.070 in. Maximum width; agavgadvanced medium range air to air missile/lau 129a, end chamfered 45 degrees, flat edge 0.0675 in.
TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat fillister
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.245 inches and 0.255 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.574 inches and 0.576 inches
Undercut Diameter:
Between 0.210 inches and 0.212 inches
Under Head Length:
Between 1.282 inches and 1.302 inches
Undercut Width:
Between 0.029 inches and 0.032 inches
Pin Head Diameter:
Between 0.580 inches and 0.600 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.290 inches and 0.310 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 356.0 or aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 4260, t6 assn standard single material response or qq-a-225/8, t651 federal standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type ii, class 1 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
