부품 번호 375-40-45ITEM

Headless Shoulder Pin

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 336.74 and 454.599 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
375-40-45item
비무장화:
No
수명:
N/A
측정 단위:
No qup EA
NIIN:
012996738

부품 정보
In shoulder end drill three 0.344 inch diameter longitudinal holes, equally spaced on a 1.500 inch diameter circle circumscribed around axial center, first hole 5.938 inches depth intersecting 0.344 inch diameter perpendicular hole, tap with 0.125 national pipe thread, second hole 9.625 inches depth intersecting additional 0.344 inch diameter perpendicular hole equidistant 3.688 inch distance between holes, tap with 0.125 national pipe thread, third hole 13.312 inches depth intersecting 0.344 inch diameter perpendicular hole tap with 0.125 national pipe thread; all three perpendicular holes 1.938 inches depth; two symmetrical grooves parallel to shoulder end 1.125 inches from end, 0.531 inch width by 1.000 inches depth; keyway 0.375 inch width 0.250 inch depth 1.625 inches length with a full radius corner

NSN
국가 주식 번호:
5315-01-299-6738 5315012996738
TXT
묘사:
Headless Shoulder Pin
INC
INC
아이템 이름 코드:
16749
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.156 inches
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
1.156 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 4.999 inches and 5.000 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 4.705 inches and 4.716 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
19.250 inches
MRC:
None.ABPC
Undercut Width:
0.156 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
MRC:
None.ABRC
First Hole Diameter:
0.344 inches
MRC:
None.ABRD
Second Hole Diameter:
0.344 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
5.750 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
7.375 inches
MRC:
None.AMCS
First End Taper Length:
0.125 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Shoulder end
MRC:
None.CRMG
First End Taper Angle:
45.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shoulder outside diameter
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Undercut

{lang[cimilar]} Headless Shoulder Pins

« Nails, Machine Keys and Pins {lang[catalog]}
지금 비교»
맑다 | 숨기다