부품 번호 375-40-45-27

Headless Shoulder Pin

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 1957.033 and 2559.197 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
375-40-45-27
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
012962102

부품 정보
Drill 0.344 inch diameter 7.938 inch depth longitudinal hole in shoulder end, on axial center intersecting 0.344 inch diameter perpendicular hole, tap with 0.125 national pipe thread; two summetrical grooves parallel to shoulder end 1.125 inch from end, 0.531 inch width by 1.000 inch depth; keyway 0.375 inch width, 0.250 inch depth, 1.625 inches length with a full radius corner, on longitudinal centerline in shank; shank threaded for tn 12 timken locknut

NSN
국가 주식 번호:
5315-01-296-2102 5315012962102
TXT
묘사:
Headless Shoulder Pin
INC
INC
아이템 이름 코드:
16749
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered and counterbored
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.156 inches
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
1.156 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 4.999 inches and 5.000 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 4.705 inches and 4.716 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
15.875 inches
MRC:
None.ABPC
Undercut Width:
0.156 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
0.344 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
7.750 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
0.125 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Threaded end
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shoulder outside diameter
MRC:
None.CTHC
Second End Taper Angle:
45.0 degrees
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Undercut

{lang[cimilar]} Headless Shoulder Pins

« Nails, Machine Keys and Pins {lang[catalog]}
지금 비교»
맑다 | 숨기다