부품 정보
Pin, drag, main landing gear
TXT
묘사:
Main Landing Gear Drag Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
1.055 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 1.3105 inches and 1.3115 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.9357 inches and 0.9367 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through head
First Hole Diameter:
Between 0.515 inches and 0.524 inches
Distance From Centerline Of Hole To End Of Pin:
Between 5.442 inches and 5.448 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C-130 landing gear components
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
0.650 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Small end
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
MRC:
A recording of the physical,functional,and performance characteristics for an item of supply.TEXT
General Description:
Matl steel 4340; length 6.000 in.; 1st end diameter 0.9362 in. Nom; shank diameter 1.3110 in. Nom; 2nd end diameter 0.500 in. Nom; 1st end length 1.055 in. Nom; shank length 4.295; 2nd end length 0.650 in. Nom; one thd hole through side 0.500-20unf-3b; one drilled hole through 1st end 0.515 to 0.524 in.
