부품 정보
Gasket, cover, ejb/mjb (cvn65, 68-76)
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.563 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
32.440 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
29.440 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
26.750 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
29.750 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
9.060 inches
Outside Edge To Bolt Hole Center Distance Along Width:
1.250 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.630 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.156 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
9
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Jet engine
Outside Edge To Inside Edge Smallest Distance Along Width:
1.340 inches
Outside Edge To Inside Edge Smallest Distance Along Length:
1.340 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Agasket has a shore durometer of 40; the ninth bolt hole circle diameter is 0.375 in; there are 4 unequally spaced bolt holes along length of gasket & no bolt holes along opposite side of gasket
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber neoprene
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm d 2000 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
