부품 정보
Material thickness ofband and retainer shall be adequate to sustain an axial load of 25590 pounds w/o permanent deformation
TXT
묘사:
Grooved Clamp Coupling
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Grooved retainer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 9.410 inches and 9.470 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
Not rated
MRC:
The maximum load for which the item is rated.AGCS
Maximum Load Rating:
Not rated
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the latch.AGPR
Latch Style:
Single
MRC:
The measurement of the included angle,expressed in degrees.AKZZ
Included Angle In Deg:
19.5
MRC:
Indicates the type of nut used in conjunction with the item.ALDS
Nut Type:
Plain castellated hexagon
MRC:
An indication of whether or not a sealing inner liner is included.ALDW
Sealing Inner Liner:
Not included
Retainer Width:
0.750 inches
Root Width:
Between 0.354 inches and 0.364 inches
MRC:
A measurement taken at right angles to the length of the band,in distinction from thickness.ALEE
Band Width:
0.750 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Cres, ams 5525e a286 cup, quick couple err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron alloy, ams 5525, comp 660 trunnion err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron alloy, ams 5525, comp 660 t bolt err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, mil-s-5059, type 301, 1/2 hard band err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, mil-s-5059, type 301, 1/4 hard retainer err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, corrosion resisting nut err-100 err-100
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.180 inches and 0.200 inches
MRC:
The physical configuration of the item.SHPE
Shape:
Round
