부품 정보
The spanner wrench has two dowel pins on the interfacing end that are 1.00 inch apart center to center. These dowel pins are 0.067 inches in diameter, 0.215 inches in length and will interface with the holes in the externally threaded nut (p/n 6430786-1). The tool has a 3/8 inch square drive to allow the externally threaded nut to be removed and torqued during replacement.The externally threaded nut must be torqued to 50 +/-5 inch during replacement. It has a square cut out in the center to accept a 3/8 inch ratchet for removal, or at 3/8 inch torque wrench for replacemnt of the externally threaded nut.Made from crs (cold rolled steel
