TXT
묘사:
Remote Control Lever
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
0.313 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.490 inches and 0.510 inches
MRC:
The number of serrations on the item.ADDW
Serration Quantity:
36
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Starter, engine, gas turbine
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
0.292 inches
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Serrated
Center To Center Distance Between Link And Shaft Holes:
0.700 inches
Shaft End Thickness:
Between 0.510 inches and 0.540 inches
Link End Thickness:
Between 0.340 inches and 0.360 inches
MRC:
The means by which the shaft is secured.CZLP
Shaft Securing Method:
Serrations
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5355 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
One hole flat link end, clamp type shaft end
