MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Webbed, with lightening holes
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
17 both ends
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
4.5000 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
45
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Involute spline both ends
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
0.9375 inches both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
30.0 rockwell c hub and 40.0 rockwell c hub
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
81.0 rockwell a teeth and 84.0 rockwell a teeth
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
4.5540 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.312 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Straight
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
14.5000 degrees
MRC:
The measurement of the pitch angle on the item.CWQD
Pitch Angle:
64.0000 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.437 inches second end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.250 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.840 inches both ends
MRC:
A nominal measurement between specified points of the counterbore,in distinction from height.CWTB
Counterbore Depth:
1.015 inches first end
MRC:
The nominal length of a straight line which passes through the center of the counterbore,and terminates at the circumference.CWTG
Counterbore Diameter:
1.0156 inches first end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
1 step both ends
MRC:
A nominal measurement of the longest dimension of the end of the item,in distinction from width.CWWH
End Length:
0.390 inches first end
MRC:
A nominal measurement of the longest dimension of the end of the item,in distinction from width.CWWH
End Length:
0.406 inches second end
MRC:
The nominal length of a straight line which passes through the center of the end of the item,and terminates at the circumference.CWWN
End Diameter:
1.180 inches both ends
MRC:
The nominal length of a straight line which passes through the center of the first step,and terminates at the circumference.CWXB
First Step Diameter:
1.437 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e9310
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6260 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Side face, protruding hubs
