MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.620 inches first end, fifth portion
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
1.246 inches second end, fifth portion
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
1.248 inches second end, fifth portion
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
17.500 inches
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
0.999 inches second end, fifth portion
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
1.005 inches second end, fifth portion
MRC:
The direction of the shaft thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AKAF
Shaft Thread Direction:
Left-hand first end, fifth portion
MRC:
A numeric value that reflects the hardness of the teeth when used in conjunction with a hardness rating scale.BYFR
Teeth Hardness Rating:
Between 104.0 rockwell b and 108.0 rockwell b
MRC:
The number of threads on the worm.CFFB
Worm Thread Quantity:
1
MRC:
The distance a worm thread advances axially in one complete turn.CFFC
Worm Thread Lead:
0.6283 inches
MRC:
The direction of the worm thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.CFFD
Worm Thread Direction:
Left-hand
MRC:
The pressure angle of the worm,expressed in degrees.CFFF
Worm Pressure Angle In Deg:
25.000
MRC:
The angular amount the worm is inclined.CFFG
Worm Helix Angle:
5 degrees 11 min 39.95 sec
MRC:
The length of a straight line which passes through the center of the worm,and terminates at the outside circumference.CFFK
Worm Outside Diameter:
Between 2.598 inches and 2.600 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the worm.CFFL
Worm Pitch Diameter:
2.200 inches
MRC:
A numeric value that reflects the hardness of the shaft when used in conjunciton with a hardness rating scale.CFFM
Shaft Hardness Rating:
Between 104.0 rockwell b and 108.0 rockwell b
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis of the worm.CFFN
Worm Thread Section Length:
3.380 inches
MRC:
A measurement of the longest dimension of the worm body,in distinction from width.CFFP
Worm Body Length:
3.380 inches
MRC:
An indication of whether or not the worm body end/s/ is provided with a tapered bearing surface.CFFQ
Worm Body Tapered Bearing Surface End:
Not provided
MRC:
Indicates the location of the shaft(s) on the item.CFFW
Shaft Location:
Both ends of worm
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.120 inches first end, fourth portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.260 inches first end, second portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.640 inches second end, second portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
1.310 inches first end, first portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
1.380 inches first end, third portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
1.430 inches second end, first portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
1.820 inches second end, third portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
3.000 inches second end, fifth portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
3.540 inches second end, fourth portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.365 inches second end, fourth portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.370 inches second end, fourth portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.3745 inches second end, third portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.3781 inches second end, second portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.3785 inches second end, second portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.410 inches first end, fourth portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.5753 inches first end, third portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.5749 inches first end, third portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.660 inches second end, first portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.660 inches first end, first portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.840 inches first end, second portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.246 inches second end, fifth portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
1.248 inches second end, fifth portion
MRC:
A measurement taken at right angles to the length of an unthreaded section keyway.CFFZ
Unthreaded Section Keyway Width:
0.3200 inches first end, third portion
MRC:
The distance measured along a straight line from the top to the innermost point of the unthreaded section of the keyway.CFGB
Unthreaded Section Keyway Depth:
0.100 inches first end, third portion
MRC:
The distance measured along a straight line from the top to the innermost point of the unthreaded section of the keyway.CFGB
Unthreaded Section Keyway Depth:
0.140 inches second end, third portion
MRC:
A measurement of the longest dimension of a straight spline,in distinction from width.CFQN
Err Default:
Err default
MRC:
A measurement of the longest dimension of a straight spline,in distinction from width.CFQN
Straight Spline Length:
2.260 inches second end, fifth portion
MRC:
The number of straight splines on the item.CFQT
Err Default:
Err default
MRC:
The number of straight splines on the item.CFQT
Straight Spline Quantity:
10 second end, fifth portion
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, qq-s-624, comp 4140
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, qq-s-624, comp 4140
