부품 정보
Body is grooved 0.094 in. Min 0.104 in. Maximum wide, 1.256 in. Min 1.259 in. Maximum diameter 0.240 in. Min 0.260 in. Maximum from flange to provide for locking
TXT
묘사:
Bearing Retaining Plate
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Recessed w/ aperture
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 2.040 inches and 2.060 inches
Minor Thickness:
Between 0.587 inches and 0.593 inches
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
Between 1.100 inches and 1.120 inches
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
Between 0.380 inches and 0.410 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
Between 1.100 inches and 1.120 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.192 inches and 0.210 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 1.100 inches and 1.120 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Three holes
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.050 inches and 0.070 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.637 inches and 0.663 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Secondary power system
Distance From Vertical Centerline To Center Of Right Hole:
0.745 inches
Distance From Horizontal Centerline To Center Of Right Hole:
0.430 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded
Distance Between Hole Centers Along Base:
1.553 inches
Distance Between Hole Centers Along Height:
1.290 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
