TXT
묘사:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain
Concentric Hole Depth:
Between 0.710 inches and 0.770 inches
Concentric Hole Diameter:
Between 0.362 inches and 0.367 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.940 inches and 0.960 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.641 inches and 0.690 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.310 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
First Diameter From Wrenching Feature:
0.438 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
Between 0.365 inches and 0.375 inches
First Radial Fluid Hole Diameter:
Between 0.162 inches and 0.182 inches
Distance From First Radial Hole Center To End Of Bolt:
0.620 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
0.830 inches
Wrenching Feature Height:
0.120 inches
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
20
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.438 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758 military specification single material response
