부품 정보
One 0.945 to 0.955 in. Dia. Hole with three equally spaced slots 0.110 to 0.130 in. Wide centrally located between mtg holes in second end
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.925 inches and 0.965 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 2.630 inches and 2.690 inches
Second Leg Width:
Between 1.150 inches and 1.210 inches
Second Leg Corner Radius:
Between 0.060 inches and 0.100 inches
First Leg Hole Diameter:
Between 0.245 inches and 0.265 inches
Second Leg Hole Diameter:
Between 0.116 inches and 0.128 inches
Second Leg Distance Between Hole Centers Along Width:
Between 0.901 inches and 0.911 inches
Second Leg Distance Between Hole Centers Along Length:
0.901 mils and 0.911 centimeters
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.120 inches and 0.155 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.107 inches and 0.217 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.050 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.050 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.230 inches and 0.260 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.230 inches and 0.260 inches
First Leg End Radius:
Between 0.230 inches and 0.260 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius and tapered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Four holes
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 301
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5059 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
