부품 정보
End of bore front side of gearbelled out on 1/4 in. Radius from od of bore to face of hub
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Webbed, offset, solid
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
5.2500 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
21
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
10a w/ keyway both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
W/ keyway both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
59.0 rockwell c and 62.0 rockwell c
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
5.405 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.769 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Spiral
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Left
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The measurement of the pitch angle on the item.CWQD
Pitch Angle:
58.2333 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.750 inches second end
MRC:
The nominal distance between the body face and the recessed hub end.CWQR
Distance Between Body Face And Recessed Hub End:
0.129 inches first end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
1.109 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
1.505 inches both ends
MRC:
A nominal measurement taken at right angles to the length of a keyway,in distinction from thickness.CWSN
Keyway Width:
0.315 inches both ends
MRC:
The nominal distance from the center of the bore to the bottom of the keyway(s).CWSR
Distance From Bore Center To Keyway Bottom:
0.901 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain both ends
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
2.125 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8620
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624, comp 8620-canceled federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Side face, front hub recessed, back hub protruding
