부품 정보
One spline omitted for locating key; offset height: 0.060 in.
TXT
묘사:
Remote Control Lever
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Between 0.391 inches and 0.401 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
17
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Between 0.333 inches and 0.336 inches
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Splined
Center To Center Distance Between Link And Shaft Holes:
Between 1.026 inches and 1.036 inches
Shaft End Thickness:
Between 0.498 inches and 0.502 inches
Link End Thickness:
Between 0.365 inches and 0.375 inches
Link End Hole Diameter:
Between 0.126 inches and 0.128 inches
Distance Between Fork Inside Spread:
Between 0.245 inches and 0.255 inches
MRC:
The means by which the shaft is secured.CZLP
Shaft Securing Method:
Spline
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5613 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis link end, securing hol (s) shaft end
