부품 정보
External involute splines 2nd end; pitch diameter: first end, 0.687 in.
TXT
묘사:
Rigid Shaft Coupling
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.6250 inches first end and 0.6270 inches first end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.7660 inches first end and 0.7780 inches first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.750 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
11 first end
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.5000 inches first end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.4700 inches second end and 0.4800 inches second end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight second end
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.000 first end
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.378 inches first end
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute first end
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-s-3002 military specification single treatment response
