부품 정보
Guides, saw blade, w/ball bearing back-up roller for 1/8, 3/16, 1/4, 3/8, 1/2and 3/4 in.W blades, 1 set; jaw, workholding, light, table, shielded, pencil, etching, rip fence, polishing band attachment, 1; special hand tools, 1 set; felt wheel lubricator or mist coolant, 1; band speed and tension indicator dials, 1; metal cutting, carbon band saw blades 1/4, 1/2, 3/4 in., 1 ea; chart or selector dial which shall indicate the recommended cutting, filing, friction sawing, grinding, polishing, and high speed sawing speedsin surface feet per minute for variousmaterials, the chart or selector dial shall also provide the recommended typetooth pitch; carbon, 1 set; high speed steel saw blades, 1 set, for various thickness of plastics, wood, and ferrous and non-ferrous metal
TXT
묘사:
Metal Cutting Band Saw
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
60.000 hertz
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Fabrasive bands, no.50, 80, 150 aluminum oxide, 1 in.W 12; adapter, saw blade guide, 90 degrees angle, 1; belt drive, 1 set; blade, band saw, flexible back, conventional tooth, raker, 1 set; 100 ft coils, in accordance w/ggg-b-421, type 1, style 1, 1/8 in. W, 0.025 in.Thk, 1; pitch, 14, 18, 24; coil, 1/4 in.W, 0.025 in.Thk, 1; pitch, 10, 18, 24; coil, 1/2 in.W, 0.025 in.Thk, 1; pitch, 6, 10; coil, 3/4 in.W.0.032 in.Thk, 1; ptich, 6, 10; coil, blade, band saw, flexible back, skip tooth, 100 ft coils in accordance w/ggg-b-421, type 1, style 2, 1/4in.W, 0.025 in.Thk, 1; pitch, 6; coil, 1/2 in.W, 0.025 in thk, 1; pitch, 4; coil, 3/4 inw, 0.032 in. Thk, 1; pitch, 3; coil, circle cutting attachment, 1; cut-off-mitre attachment, file band, flat bastard, medium cut, 1/4 in.W, 1; file band, flat bastard, medium cut, 1/2 in.W, 1; file band, oval bastard, medium cut, 1/4&1/2 in.W, 1; file band, flat bastard, medium cut, 3/8 in.W, 1; file band, oval bastard, med.Cut, 3/8 in.W, 1; guides, abrasive band, for 1 in.W band, 1 set; guides, file band, for 1/4, 3/8, 1/2 in.W band, 1 set
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Abrasive bands, no.50, 80, 150 aluminum oxide, 1 in.W 12; adapter, saw blade guide, 90 degrees angle, 1; belt drive, 1 set; blade, band saw, flexible back, conventional tooth, raker, 1 set; 100 ft coils, in accordance w/ggg-b-421, type 1, style 1, 1/8 in. W, 0.025 in.Thk, 1; pitch, 14, 18, 24; coil, 1/4 in.W, 0.025 in.Thk, 1; pitch, 10, 18, 24; coil, 1/2 in.W, 0.025 in.Thk, 1; pitch, 6, 10; coil, 3/4 in.W.0.032 in.Thk, 1; ptich, 6, 10; coil, blade, band saw, flexible back, skip tooth, 100 ft coils in accordance w/ggg-b-421, type 1, style 2, 1/4in.W, 0.025 in.Thk, 1; pitch, 6; coil, 1/2 in.W, 0.025 in thk, 1; pitch, 4; coil, 3/4 inw, 0.032 in. Thk, 1; pitch, 3; coil, circle cutting attachment, 1; cut-off-mitre attachment, file band, flat bastard, medium cut, 1/4 in.W, 1; file band, flat bastard, medium cut, 1/2 in.W, 1; file band, oval bastard, medium cut, 1/4&1/2 in.W, 1; file band, flat bastard, medium cut, 3/8 in.W, 1; file band, oval bastard, med.Cut, 3/8 in.W, 1; guides, abrasive band, for 1 in.W band, 1 set; guides, file band, for 1/4, 3/8, 1/2 in.W band, 1 set
MRC:
Indicates the type of frame included on the item.ALDF
Frame Type:
Rigid
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
220.0 volts or 440.0 volts
MRC:
The means by which the item is fed.AMWX
Feed Method:
Work into cutting band
MRC:
The speed at which an item has been tested and rated to perform without damage or failure of the rotating components,expressed in revolutions per minute.AMZE
Rotational Speed Rating In Rpm:
Not rated
MRC:
An indication of the rated horsepower of the item.ANCY
Horsepower Rating:
3.000
MRC:
A measurement between specified points on the throat,in distinction from height.AQCL
Throat Depth:
26.000 inches
MRC:
An indication of whether or not a braking facility/ies/ is included.AQLX
Braking Facility:
Not included
MRC:
The means by which the item is driven.ARCM
Drive Method:
Electric motor
MRC:
A measurement of the longest dimension of a table,in distinction from width.ARDQ
Table Length:
26.000 inches
MRC:
A measurement taken at right angles to the length of a table,in distinction from thickness.ARDR
Table Width:
26.000 inches
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
1
MRC:
Indicates the type of table provided.BNBB
Table Type:
Tilting
MRC:
The right tilt angle of the table,expressed in degrees.BWLY
Table Right Tilt Angle In Deg:
45.000
MRC:
The left tilt angle of the table,expressed in degrees.BWLZ
Table Left Tilt Angle In Deg:
5.000
MRC:
Indicates the type of band for which the item is designed.BWMC
Band Type For Which Designed:
File or saw blade
MRC:
The maximum measurement of the longest dimension of the file the item will accommodate,in distinction from width.BWMD
File Maximum Length Accommodated:
Any acceptable
MRC:
The maximum measurement taken at right angles to the length of the file the item will accommodate,in distinction from thickness.BWMF
File Maximum Width Accommodated:
0.500 inches
MRC:
The maximum measurement taken at right angles to the length of the blade the item will accommodate,in distinction from thickness.BWMH
Blade Maximum Width Accommodated:
1.000 inches
MRC:
An indication of whether or not a vise is provided.BWML
Vise:
Not provided
MRC:
The distance between the guide and the table.BWMN
Distance Between Guide And Table:
12.000 inches
MRC:
The minimum and maximum limits of the cutting speed.BWMZ
Cutting Speed Range:
+50.0/+4000.0 feet per minute
MRC:
The minimum and maximum limits of the cutting speed.BWMZ
Cutting Speed Range:
+50.0 to 4000.0 feet per minute
MRC:
An indication of whether or not an infinite cutting speed feature is provided.BWNC
Infinite Cutting Speed Feature:
Provided
MRC:
An indication of whether or not a power feed feature is provided.BWND
Power Feed Feature:
Provided
MRC:
An indication of whether or not a built-in coolant system is included.BWNG
Built-in Coolant System:
Not included
MRC:
An indication of whether or not an integral butt welder is included.BWNH
Integral Butt Welder:
Included
MRC:
An indication of whether or not an integral grinder is included.BWNJ
Integral Grinder:
Included
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
26 size
