부품 정보
Mounting tang 0.540 in. Length, 0.330 in. Min 0.350 in. Maximum width
MRC:
Indicates the type of hole/s/ in the tongue.AAAL
Tongue Hole Type:
Round, unthreaded and oblong
MRC:
The environmental elements or conditions that the cushioning is designed or protected to resist or withstand satisfactorily.AAAP
Cushioning Environmental Protection:
Any acceptable
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.344 inches
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
0.440 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.750 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.328 inches and 0.344 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.036 inches and 0.040 inches
Center To Center Distance Between Loop And Mounting Hole:
0.700 inches
MRC:
A measurement of the longest dimension of a loop,in distinction from width.AZDB
Loop Length:
0.800 inches
Largest Loop Width:
0.470 inches
Smallest Loop Width:
0.340 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic vinyl cushion
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1008 band or steel comp 1010 band
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Cmpv+001aa, fscm 11862 mfr ref single material response cushion
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae assn standard all material responses band
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Primer band
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Gm 6001-m code b, grade 96 fscm 11862 mfr ref single treatment response band
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Multiple loop
