부품 번호:
340-6000-1002475alt1line354
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
6.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
7.000 inches
MRC:
The value,or range of values,of root mean square potential for which the item is rated.ACYN
Ac Voltage Rating:
115.0 volts
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
60.0 hertz
MRC:
The characteristic of the radiant energy generated by the lamp within or adjacent to the visible spectrum of light.AGDV
Emitted Light Characteristic:
Green 2nd group
MRC:
The characteristic of the radiant energy generated by the lamp within or adjacent to the visible spectrum of light.AGDV
Emitted Light Characteristic:
Red 1st group
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Two 0.530 in. Diameter mtg holes spaced 2.750 in. From center line to hole center, 2.062 in. From lg end dim.One 0.531 in. Diameter mtg hole spaced 0.250 in. From left of center line to center, 7.125 in. From lg end dim.
MRC:
Indicates the type of device used to register the condition(s).AMKD
Indicator Type:
Light 1st group
MRC:
Indicates the type of device used to register the condition(s).AMKD
Indicator Type:
Light 2nd group
MRC:
The element,compound,or mixture of which the panel is fabricated,excluding any surface treatment.ANJG
Panel Material:
Steel
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
Holding solenoids energized, horn cutout, secure snorkel, snorkel
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
2 1st group
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
1 2nd group
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Enameled
