부품 정보
Mixer spacer has six holes; the first hole is spaced 0.140 in. Min.-0.160 in. Max. From the left edge along the length with 0.720 in. Min.-0.740 in. Max. Distance between the center of this hole and the center of the hole on the right and 0.071 in. Min.-0.091 in. Max. From the lower edge of the spacer to the hole centers; these holes are 0.108 in. Min.-0.113 in. Max. In diameter and fully radiused to 0.178 in. Min.-0.198 in. Max. Diameter and open to the outside edges; two holes with identical dimensions are also located across the top edge of the spacer
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.010 inches and 1.047 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.838 inches and 0.858 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Separable
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, class 1a military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
