MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.004 inches
MRC:
The angle of the conical recess of the hole,expressed in degrees.ABQS
Countersunk Hole Angle In Deg:
82.0
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.625 inches and 0.630 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
5
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
10.375 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 4.157 inches and 4.160 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Grumman aircraft, model a10
MRC:
The number of holes provided for aligning the item.AJVW
Alignment Hole Quantity:
3
MRC:
The spacing between the mounting holes.ALXY
Mounting Hole Spacing:
Equally spaced on 5.496 in. Min, 5.504 in. Maximum bolt circle
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron, cast wear surface err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel mounting disk err-100 err-100
MRC:
Indicates the braking surface location on the item.AYPQ
Braking Surface Location:
Internal
MRC:
The length of a straight line which passes through the center of the braking surface,and terminates at the circumference.AYQA
Braking Surface Diameter:
Between 8.995 inches and 9.000 inches
MRC:
The measurement taken at right angles to the length of the braking surface,in distinction from thickness.AYQB
Braking Surface Width:
2.047 inches
MRC:
Designates the size of the hole(s) of the item.AYQC
Hole Size:
0.328 in. Min, 0.385 in. Maximum dia
MRC:
The spacing between the holes.AYQE
Hole Spacing:
Spaced between mtg holes on 5.496 in. Min., 5.504 in. Maximum diameter bolt circle, 2 holes spaced 72 degrees apart, 144 degrees eac from 3rd hole
MRC:
An indication of whether or not a cooling fin/s/ is included.AYQF
Cooling Fin:
Not included
MRC:
An indication of whether or not an adjustment hole is included.AYQH
Adjustment Hole:
Not included
MRC:
An indication of whether or not an inspection hole is included.AYQJ
Inspection Hole:
Included
MRC:
An indication of whether or not an oil drain hole is included.AYQK
Oil Drain Hole:
Not included
MRC:
An indication of whether or not a balancing pad(s) is included.AYQL
Balancing Pad:
Not included
