TXT
묘사:
Standoff Insulator
MRC:
A measurement of the distance diagonally from one corner to the opposite corner.ABGB
Width Across Corners:
0.287 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.594 inches
MRC:
The length of a straight line which passes through the center of the circular top, and terminates at the circumference.AJQL
Top Diameter:
0.230 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.250 inches
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter,and the thread location.CQBP
Screw Thread Series Designator And Location:
Electrical termination unc and mounting facility unc
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis,and the location.CQJM
Thread Length And Location:
0.156 electrical termination inches and 0.156 mounting facility inches
MRC:
The number of screw threads on the item per linear inch,including incomplete threads,on a line parallel to the thread axis and the thread location.CQTP
Screw Thready Qty Per Inch (tpi) And Location:
32 electrical termination and 32 mounting facility
MRC:
The length of a straight line which passes through the center of a coaxial cylinder which would bound the crest of an external thread or the root of an internal thread and terminates at the circumference,and the thread location.CRFL
Screw Thread Diameter And Location:
0.138 electrical termination inches and 0.138 mounting facility inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.MTLC
Material And Location:
Electrical termination brass, qq-b-626 and mounting facility brass, qq-b-626 and shank plastic, diallyl phthalate, mil-m-14, type sdg-f
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Metal, base and cap
