부품 정보
Offset height: 0.382 in.
TXT
묘사:
Remote Control Lever
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Between 0.500 inches and 0.508 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.210 inches and 1.250 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
15
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Between 0.4389 inches and 0.4439 inches
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Splined
Center To Center Distance Between Link And Shaft Holes:
1.970 inches
Shaft End Thickness:
Between 0.480 inches and 0.490 inches
Link End Thickness:
0.500 inches
Link End Hole Diameter:
Between 0.3755 inches and 0.3785 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Split end screw clamping feature
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Bfha and agjr
MRC:
The means by which the shaft is secured.CZLP
Shaft Securing Method:
Spline
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset, one hole link end, clamp type shaft end
