TXT
묘사:
Fluid Filter Head
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.453 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.200 inches
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
1.625 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
5.510 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.730 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACRW
Inlet Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACRX
Inlet Thread Direction:
Right-hand
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
FIGH-TI-NGV-EHIC
MRC:
A designation indicating the diameter-pitch and the number of threads per specific measurement scale applied to a series of specific diameters of an inlet.ARNX
Inlet Thread Series Designator:
Unf
MRC:
A designation indicating the diameter-pitch and the number of threads per measurement scale applied to a series of diameters of an outlet.ARTX
Outlet Thread Series Designator:
Unf
MRC:
The direction of the outlet thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ARTY
Outlet Thread Direction:
Right-hand
MRC:
Indicates the type of inlet port provided.CDXM
Inlet Port Type:
Threaded female, gasket seal
MRC:
Indicates the type of outlet port provided.CDXQ
Outlet Port Type:
Threaded female, gasket seal
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.CDXR
Outlet Thread Class:
2b
MRC:
An indication of whether or not a valve is included.CDXY
Valve:
Not included
MRC:
An indication of whether or not a mounting bolt hole(s) is provided.CDYC
Mounting Bolt Hole:
Provided
MRC:
An indication of whether or not a filter element is included.CDYD
Filter Element:
Not included
MRC:
Designates the nominal thread diameter and number of threads per measurement scale of an inlet threaded hole.CRHS
Inlet Thread Size:
0.875 inches
MRC:
A designation that is used for the purpose of general identification of the outlet thread.CSJD
Outlet Thread Size:
0.875 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Mrc abkg is for the two bolt holes closest to the filter base, third bolt hole is centered 3.575 in. Up from the filter base; filter mounting threads 1 1/4-12unf-2a
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Provides a solid mount for replaceable fuel filter element, also features connections for inlet and outlet lines
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
3
