MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
Between 0.575 inches and 0.580 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
Between 0.110 inches and 0.150 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 3.178 inches and 3.198 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.984 inches and 0.990 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
Between 0.240 inches and 0.260 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
Between 0.646 inches and 0.666 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.5520 inches and 0.5550 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
85.0 rockwell f
Major Diameter Length:
Between 0.073 inches and 0.083 inches
MRC:
Indicates the location of the counterbore on the item.BDYS
Counterbore Location:
Aa end
MRC:
An indication of whether or not a bore countersink is included.BQDC
Bore Countersink:
Not included
MRC:
An indication of whether or not a bore counterbore is included.BQSF
Bore Counterbore:
Included
Aa End Diameter:
Between 0.778 inches and 0.784 inches
Bb End Shank Diameter:
Between 0.724 inches and 0.725 inches
Bb End Radius:
Between 0.020 inches and 0.040 inches
Shoulder First Fillet Radius:
Between 0.040 inches and 0.050 inches
Shoulder Second Fillet Radius:
Between 0.040 inches and 0.050 inches
Length From Aa End To Largest Diameter Face:
Between 0.761 inches and 0.771 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Bronze, ams, ams4846
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Bronze, ams, ams4846
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain-shouldered
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Aircraft eng r2000
