부품 정보
Pin, cylinder bearing
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Cross drilled and circular grooved
First End Groove Width:
1.6720 inches
First End Groove Diameter:
0.2500 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Cross drilled and externally threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.349 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C5 acft
First End Distance From End To Groove:
Between 0.070 inches and 0.080 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.8300 inches and 0.8400 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
0.0780 inches
First End Distance From Hole Center To End:
0.403 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.2500 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.0780 inches
Second End Distance From Hole Center To End:
0.125 inches
Second End External Thread Length:
0.440 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.299 inches and 0.300 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
1first end has 0.109 diameter hole 0.45 inches deep; shaft has .095 diameter crossdrilled hole thru; 1.651 inches center of shaft's crossdrilled hole to first end; t.O. 9h7-3-14-3 fig 5-4 ind 35 and 52; used on hydraulic power transfer package assembly
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
