TXT
묘사:
Observation Window
MRC:
The actual number of full layers of material.AAFW
Ply Quantity:
Any acceptable
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.250 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
5.000 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.125 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Weather resistant
MRC:
The ability of the material to transmit light and allow visual perception.AJQE
Material Transparency:
Clear
MRC:
The temperature of the item at maximum operating pressure.AKTR
Tempurature At Maximum Operating Pressure:
Not rated
MRC:
The protection afforded by the material as rated by the thickness of sheet lead equivalent.AKVH
Radiation Protection Rating:
Not rated
MRC:
Indicates the type of edge on the item.AQQR
Edge Type:
Flat finish
MRC:
The maximum pressure at which the item is designed to operate.BJDW
Maximum Operating Pressure:
Not rated
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
8000.0 pounds per square inch
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Not rated
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Square corners
