부품 정보
3.000 in. Diameter by 1.125 in. High hub on recessed face and one 0.500 in. Diameter hole on 4.500 in. Bolt circle radius
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
Between 0.955 inches and 0.956 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 1.122 inches and 1.123 inches
Spline Width:
0.281 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 10.940 inches and 11.060 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 1.480 inches and 1.520 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
6
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Flanging steel per b4a8a fscm 24446
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Paint per s.I. 37700 sec. 28 fscm 24446
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the handwheel.AWJX
Handwheel Style:
Disk
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the drive facility.AWJY
Drive Facility Style:
Parallel spline
MRC:
An indication of whether or not a handle rotating feature is included.AWKD
Handle Rotating Feature:
Not included
MRC:
An indication of whether or not a weight is included to offset the weight of the handle.AWKE
Handle Counterbalancing Weight:
Not included
MRC:
An indication of whether or not a ratchet is included.AWKF
Ratchet:
Not included
