TXT
묘사:
Extension Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.326 inches
MRC:
A measurement taken at right angles to the length of an opening,in distinction from thickness.ABPP
Opening Width:
0.400 inches second end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Long round hook second end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Reduced center loop first end
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
0.072 inches
Spring Free Length:
1.624 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
11-1/2
MRC:
Indicates the design type of the item.APGF
Design Type:
Open
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 13.700 pounds and 2.320 pounds
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
Between 50.000 pounds per inch and 58.000 pounds per inch
Spring Free Outside Diameter:
0.470 inches
Hook Radius:
0.080 inches first end and 0.095 inches first end
Hook Radius:
0.100 inches second end and 0.120 inches second end
MRC:
An indication of the angular relationship of the ends of the item.AXMH
End Angular Relationship:
Ends angled one to other
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
Between 1.630 inches and 2.180 inches
Coil To Hook Inside Length:
0.160 inches first end and 0.190 inches first end
Coil To Hook Inside Length:
0.480 inches second end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 631
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5673 assn standard single material response or ams 5678 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
