부품 번호 3153407

Tapping Screw

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 44.12 and 59.562 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
3153407
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
014707020

부품 정보
Item is a self-tapping, removable, concrete anchor with a specially designed two lead thread, two threads of unequal size, larger diameter thread is notched at intervals along its length to facilitate tapping into masonry materials; a specially-sized carbide-tipped drill bit is suplied with each box of anchors for hole preparation; installation hole shouldbe drilled to not less than one-quarter inch deeper than the anchor penetration into the masonry; the finish has a proprietary synthetic polymer coating; the end item identification is the next generation radar (nexrad), which is used by the national weather service (nws)

NSN
국가 주식 번호:
5305-01-470-7020 5305014707020
TXT
묘사:
Tapping Screw
INC
INC
아이템 이름 코드:
41756
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 1.2032 inches and 1.2968 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Chamfer flange
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.170 inches and 0.190 inches
MRC:
None.AATB
Width Between Flats:
Between 0.305 inches and 0.310 inches
MRC:
None.AATC
Extended Washer Diameter:
Between 0.398 inches and 0.432 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Slot
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Radar
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.CRGF
Nonmachine Thread Style:
Cone point (type bp)
MRC:
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.CTYF
Nonmachine Thread Diameter:
0.260 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1022
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed-std-66 federal standard single material response

{lang[cimilar]} Tapping Screws

« Screws {lang[catalog]}
지금 비교»
맑다 | 숨기다