TXT
묘사:
Grooved Clamp Coupling
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Grooved retainer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
3.160 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
800.0 degrees fahrenheit
MRC:
A measurement of the smallest dimension of the retainer,in distinction from length or width.ADTJ
Retainer Thickness:
0.620 inches
MRC:
The maximum load for which the item is rated.AGCS
Maximum Load Rating:
Not rated
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the latch.AGPR
Latch Style:
Single
MRC:
The measurement of the included angle,expressed in degrees.AKZZ
Included Angle In Deg:
40.0
MRC:
Indicates the type of nut used in conjunction with the item.ALDS
Nut Type:
Self-locking hexagon
MRC:
The number of segments included in the item.ALDT
Segment Quantity:
2
MRC:
An indication of whether or not a sealing inner liner is included.ALDW
Sealing Inner Liner:
Not included
Retainer Width:
0.500 inches
MRC:
A measurement of the smallest dimension of the band,in distinction from length or width.ALED
Band Thickness:
Any acceptable
MRC:
A measurement taken at right angles to the length of the band,in distinction from thickness.ALEE
Band Width:
0.625 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, corrosion resisting band err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, corrosion resisting bolt err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, corrosion resisting nut err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Silver nut
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.218 inches
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Nut silver
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Silver
MRC:
The physical configuration of the item.SHPE
Shape:
Round
