TXT
묘사:
Protection Bellows
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the outside circumference.AHMG
Large End Outside Diameter:
2.190 inches
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the outside circumference.AHMH
Small End Outside Diameter:
1.310 inches
MRC:
A numeric value that reflects the durometer scale hardness rating of a nonmetallic item.BMJT
Durometer Hardness Rating:
50.0
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the inside circumference.CDDB
Large End Inside Diameter:
1.940 inches
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the inside circumference.CDDD
Small End Inside Diameter:
1.060 inches
MRC:
A measurement of the longest dimension of an item when it is in a neutral position.CPYN
Neutral Length:
1.435 inches
MRC:
A measurement of the smallest dimension between the ends of the item,in distinction from length or width.CPYW
Thickness Between Ends:
Between 0.030 inches and 0.040 inches
MRC:
A measurement of the smallest dimension of both ends of the item,in distinction from length or width.CPYX
Thickness At Both Ends:
0.125 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Zz-r-765, class 3, grade 50 federal specification single material response
