부품 정보
Slot end has another hole drilled 0.264 inches , 0.271 inches diameter, 2.375 inches long distance from centerline of hole of end of pin
TXT
묘사:
Headed Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.060 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.125 inches
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
0.880 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.485 inches and 0.500 inches
Under Head Length:
2.620 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled slotted end
First Hole Diameter:
Between 0.186 inches and 0.191 inches
Distance From Centerline Of Hole To End Of Pin:
2.000 inches
Pin Chamfer Angle:
45.0 degrees
Pin Head Diameter:
Between 0.984 inches and 1.000 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.130 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a276 condition a assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35, type 1 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight
