부품 정보
First leg holes counterbored, 0.375 in. Min and 0.395 in. Maximum dia, 0.035 in. Min and 0.045 in. Maximum dp; two nuts also provided
TXT
묘사:
Double Angle Bracket
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Counterbored
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
0.700 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
0.700 inches
Second Leg Width:
3.861 inches
Second Leg Corner Radius:
0.310 inches
First Leg Hole Diameter:
Between 0.280 inches and 0.285 inches
Second Leg Distance Between Hole Centers Along Width:
3.241 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.310 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.310 inches
Second Leg Slot Length:
0.290 inches
Second Leg Slot Width:
0.215 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.100 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.100 inches
Center Section Height:
1.835 inches
Center Section Width:
3.700 inches
Center Section Thickness:
0.100 inches
First Leg Width:
3.230 inches
First Leg Corner Radius:
0.240 inches
First Leg Distance Between Hole Centers Along Width:
2.750 inches
First Leg Distance From Edge To Hole Center Along Width:
0.240 inches
First Leg Distance From Edge To Hole Center Along Length:
0.240 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
2 slots
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
Second Leg Angle:
6.0 degrees
First Leg Offset Angle:
6.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams4902 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset double angle
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Engine model f404