부품 정보
Furnished with pin, p/n ms16556-602; insert, p/n 935277-1, cage 82577; and washer 0.063 in. Thick x 1.000 in. Wide x 1.260 in. Long
TXT
묘사:
Internally Relieved Body Bolt
MRC:
The number of single screw threads per inch of the threaded portion.AAEL
Threads Per Inch:
24 concentric hole
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.687 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
1.500 inches
Concentric Hole Depth:
Between 0.850 inches and 0.865 inches
Concentric Hole Diameter:
0.315 inches
MRC:
A measurement of the extent of internal threads,including incomplete threads,along a line parallel to the longitudinal axis.ABXT
Internal Thread Length:
0.770 inches concentric hole
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.375 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Unjf concentric hole
MRC:
The direction of the internal thread when viewed axially.CGMJ
Internal Thread Direction:
Right-hand concentric hole
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.312 inches concentric hole
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance of an internal thread.CWWR
Internal Thread Class:
3b concentric hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Nickel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
H+4-99, type 2, gr b, cage 82577 mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Counterbore threaded
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf
